Skip to content

Thermal Design Engineer

Mind RoboticsPalo Alto, CAHybrid

First seen May 18 · open 186 days · posted onceNo pay listed

HirQ verdict

43/100 · Weak. Based on age, reposts, pay, the company's hiring and ghost signals.

Medium ghost risk
True age
186 days
Reposts
Posted once

See the evidence behind this score.

Pro shows each part of the score, the reasons, the pay percentile and the listing history.

HirQ's ghost-risk estimate and company labels are automated opinions based on what we observe on employers' public job boards: how long a listing has been open, whether it was re-listed, wording in the description, and how often roles on that board close. They are not statements about an employer's intent, and a high-risk listing can still be a real opening. Figures are as of the date shown. How we measure

At a glance

Pay
No pay listed
Level
Mid level
Experience
5+ years
Type
FullTime
Team
Hardware Engineering
Work setup
Hybrid

“- Experience with liquid cooling or hybrid air / liquid systems.”

Pay vs market

Employer-posted ranges for Hardware & Engineering roles in CA in the last 12 months (2,419 postings).

$138k
25th pct/yr
$170k
Median/yr
$195k
75th pct/yr
$109k · 10th90th · $228k

This job: No pay listed

Mind Robotics hiring

Company page
SlowingHiring36· WeakHardware, Chips & Telecom
Open roles
35
New in 30 days
4
Closed in 30 days
3
Hiring trend, 13 weeksPro
Follow-through: ••%Pro

About the role

From Mind Robotics's careers page, checked Nov 20

ABOUT MIND

Mind Robotics is building Physical AI for real-world industrial deployment, starting with the factory floor. We believe the hardest problems in AI are solved when researchers and engineers are hands-on with the physical world every day - and we're looking for people who are passionate about robotics, value ownership, and are excited to tackle difficult problems. Join us if you want to move beyond digital intelligence and put intelligence into motion.

ABOUT THE ROLE

As a Thermal Design Engineer at Mind Robotics, you will own the thermal architecture and analysis for our industrial robots, from high-torque actuators and constrained end effectors to dense on-board compute. You will build high-fidelity CFD/FEA models and validate them through hands-on testing, environmental stress, and hardware instrumentation. Working from concept through volume production, you will design scalable cooling solutions like heat sinks, vapor chambers, and TIMs using manufacturing processes like die casting and extrusion. Collaborating closely with electrical, firmware, and controls teams, you will turn complex thermal challenges into high-performance, real-world Physical AI systems.

RESPONSIBILITIES

  • Own thermal design and analysis across the robot including arms, end effectors, and on-board compute from concept through volume production.
  • Develop thermal architectures for high-torque-density actuators (motors, gearboxes, drives) in joints, where heat dissipation is the limiting factor on continuous performance.
  • Design cooling solutions for end effectors within tight volume, mass, and cable-routing constraints.
  • Develop thermal management for on-board compute (CPUs, GPUs, custom accelerators, power electronics), including airflow, heat sinks, heat pipes, vapor chambers, TIMs, and active cooling where needed.
  • Build thermal models (analytical, CFD, FEA) and validate them with hands-on testing (thermocouple instrumentation, IR imaging, calorimetry, and accelerated stress tests)
  • Specify and select thermal components (TIMs, fans, heat pipes, heat sinks, blowers, phase-change materials) and own supplier relationships.
  • Define thermal limits, derating curves, and protection logic in collaboration with electrical, firmware, and controls teams.
  • Contribute to DFM/DFA so thermal solutions scale from low-volume prototypes to high-volume production.
  • Develop accelerated test plans to validate thermal performance over the product's lifetime, including environmental and duty-cycle stress.

QUALIFICATIONS

  • 5+ years of experience (or equivalent "hard tech" projects) designing and validating thermal solutions for complex electromechanical systems.
  • Strong fundamentals in conduction, convection, and radiation, plus working knowledge of two-phase cooling and heat-pipe / vapor-chamber design.
  • Hands-on experience with CFD tools (Ansys Icepak, Flotherm, SolidWorks Flow Simulation, or similar) and thermal FEA.
  • Track record solving thermal problems in at least one of: high-torque-density motors / actuators, dense power electronics, or compute (CPU / GPU / custom accelerator).
  • Comfortable instrumenting, testing, and debugging thermal performance on real hardware.
  • Experience designing for volume processes (extrusion, die casting, brazing, stamping) and working with thermal component suppliers and contract manufacturers.
  • High proficiency in SolidWorks, Catia, or similar CAD tools.
  • Hands-on problem-solving approach with the ability to iterate quickly.
  • You are comfortable with ambiguity, move fast, and have an "engineering curiosity" that drives you to understand how the entire system works, not just your part.

BONUS

  • Experience in robotics, prosthetics, EV powertrains, drones, or other dense electromechanical systems.
  • Familiarity with motor / actuator thermal modeling (winding hot-spot estimation, lumped-parameter networks).
  • Experience with liquid cooling or hybrid air / liquid systems.
  • PhD or research experience in thermal sciences.

Skills mentioned

  • Robotics
  • SolidWorks
  • Embedded Systems
  • Airflow
  • CAD
Apply on Mind Robotics's siteOpens Mind Robotics's own application page.

Similar jobs

Same role or field, nearby or remote, ranked by HirQ score.

More at Mind Robotics

All roles

Keep exploring

Thermal Design Engineer

No pay listed · HirQ 43

Apply