Skip to content

Equipment Engineer

NeuralinkFremont, CA

First seen Nov 18 · open 2 days · posted once$77k–$129k/yr

HirQ verdict

78/100 · Strong. Based on age, reposts, pay, the company's hiring and ghost signals.

Low ghost risk
True age
2 days
Reposts
Posted once

See the evidence behind this score.

Pro shows each part of the score, the reasons, the pay percentile and the listing history.

HirQ's ghost-risk estimate and company labels are automated opinions based on what we observe on employers' public job boards: how long a listing has been open, whether it was re-listed, wording in the description, and how often roles on that board close. They are not statements about an employer's intent, and a high-risk listing can still be a real opening. Figures are as of the date shown. How we measure

At a glance

Pay
$77k–$129k/yr
Level
Mid level
Experience
3+ years
Type
Full Time Exempt
Team
Brain Interfaces Hardware
Work setup
On-site

Pay vs market

Employer-posted ranges for Software Engineering roles in CA in the last 12 months (6,482 postings).

$174k
25th pct/yr
$210k
Median/yr
$253k
75th pct/yr
$140k · 10th90th · $300k

This job: $77k–$129k/yr

Where this pay sits: ••th percentilePro

Neuralink hiring

Company page
Low follow-throughHiring48· WeakAutomotive, Aerospace & Defense
Open roles
74
New in 30 days
11
Closed in 30 days
18
Hiring trend, 13 weeksPro
Follow-through: ••%Pro

About the role

From Neuralink's careers page, checked Nov 20

About Neuralink

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world.

Team Description

Operating out of our Fremont cleanroom facility, the Microfabrication group fabricates thin-film polymer electrode arrays (termed "threads") integral to Neuralink implants. Our team executes the complete internal process flow, spanning photolithography, thin-film deposition, etching, polyimide processing, electroplating, metrology, and final release. Collaborating closely with process engineering, quality, and implant assembly teams, we support the ramp from initial development runs to clinical and eventually commercial manufacturing scale. The equipment engineering group directly maintains total tool availability, capability, and qualification across the cleanroom to ensure continuous high-yield array output and rapid iteration.

Job Description and Responsibilities

  • Maintain continuous operational readiness and uptime for microfabrication equipment, including photolithography steppers, PVD systems, PECVD, plasma etchers, track coaters, electroplating units, and metrology tools.
  • Perform root-cause diagnostics and repairs across electrical, mechanical, vacuum, pneumatic, RF, and control systems, implementing corrective actions to prevent recurrent failures.
  • Establish and execute preventive maintenance protocols, covering chamber cleans, component replacements, seasoning routines, and post-maintenance hardware requalifications.
  • Lead installation, facility integration, qualification (IQ/OQ/PQ), and formal release of new processing equipment, as well as deinstallations or equipment relocations.
  • Monitor key operational metrics such as MTBF, MTTR, tool availability, and SPC data to drive preventive maintenance strategies and inventory planning.
  • Oversee critical spare parts inventory, consumables, vendor service agreements, and technical interface with original equipment manufacturers.
  • Partner with process engineering to resolve yield excursions, optimize tool matching, and execute hardware upgrades to support process development.
  • Generate and maintain SOPs, PM specifications, and equipment logs in compliance with medical device quality standards and change control requirements.
  • Instruct cleanroom technicians and operating staff on proper tool safety protocols, operation, and initial fault diagnosis.
  • Collaborate with facilities management to support sub-fab infrastructure, including high-purity process gases, house vacuum, DI water, and exhaust systems.

Required Qualifications

  • Bachelor’s degree in mechanical engineering, electrical engineering, materials science, chemical engineering, physics, or a related field, OR equivalent practical experience.
  • 3+ years of direct experience in cleanroom equipment maintenance or engineering for semiconductor, MEMS, or thin-film fabrication tools.
  • Demonstrated expertise troubleshooting vacuum subsystems, RF/plasma generators, automated robotics, and electrical controls via wiring schematics, multimeters, and safety interlocks.
  • Proven record of executing root-cause failure analysis and implementing permanent corrective actions to minimize tool downtime.
  • Experience drafting, executing, and standardizing preventive maintenance procedures alongside hardware qualification plans.
  • In-depth familiarity with cleanroom safety protocols, Lockout/Tagout (LOTO), high-voltage safety, and hazardous chemical or toxic gas handling.
  • Strong technical ownership, sense of urgency, and ability to thrive in a rapid-iteration production environment with shifting priorities.

Preferred Qualifications

  • Hands-on experience with specialized microfabrication hardware, including photolithography aligners/steppers (ASML, Canon, Nikon), PVD/e-beam thin-film evaporators, PECVD/ALD systems, ICP/RIE plasma etchers, polyimide coaters/ovens, electroplating equipment, or KLA/SEM inspection tools.
  • Background operating within regulated medical device manufacturing environments (ISO 13485 / FDA 21 CFR Part 820), spanning equipment validation, calibration protocols, and formal change control.
  • Proven record of participating in cleanroom ramp-up efforts or transitioning process technologies from early R&D into high-volume production.
  • Proficiency with scripting languages and data analytics (Python, SQL) for equipment performance monitoring, tool sensor analysis, and automated PM scheduling.
  • Direct experience working with computer-integrated manufacturing frameworks, including MES platforms, CMMS software, and statistical process control (SPC).
  • Familiarity with PLC programming, SEMI SECS/GEM communication protocols, and automated tool control software architectures.
  • Demonstrated background processing thin-film flexible polymer substrates or MEMS-based neural interfaces.
  • Track record of managing vendor service contracts, leading major equipment retrofits, and refurbishing legacy fab infrastructure.

Additional Requirements and Competencies

  • Must be physically present at our Fremont cleanroom, adhering to cleanroom gowning protocols for extended durations.
  • Capability to lift approximately 50 pounds, with physical agility to maneuver, stand, or bend within confined equipment enclosures.
  • Availability for flexible shift coverage, including off-hours, weekends, and on-call rotation to address unscheduled tool downtime or scheduled maintenance.
  • Willingness to travel (<10%) for supplier training sessions and factory acceptance testing (FAT).

Expected Compensation

The anticipated base salary for this position is expected to be within the following range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. We also believe in aligning our employees’ success with the company's long-term growth. As such, in addition to base salary, Neuralink offers equity compensation (in the form of Restricted Stock Units (RSU)) for all full-time employees.

Base Salary Range

$77,000—$129,000 USD

What We Offer

Full-time employees are eligible for the following benefits listed below.

  • An opportunity to change the world and work with some of the smartest and most talented experts from different fields
  • Growth potential; we rapidly advance team members who have an outsized impact
  • Excellent medical, dental, and vision insurance through a PPO plan
  • Paid holidays
  • Commuter benefits
  • Meals provided
  • Equity (RSUs) *Temporary Employees & Interns excluded
  • 401(k) plan *Interns initially excluded until they work 1,000 hours
  • Parental leave *Temporary Employees & Interns excluded
  • Flexible time off *Temporary Employees & Interns excluded

Skills mentioned

  • Python
  • SQL
  • Data Analysis
  • SEM
  • Contract Management
  • PLC
  • Electrical Engineering
  • Mechanical Engineering
  • Robotics
Apply on Neuralink's siteOpens Neuralink's own application page.

Similar jobs

Same role or field, nearby or remote, ranked by HirQ score.

More at Neuralink

All roles

Designer

NeuralinkAustin, Texas, United States; South San Francisco, California, United States

$135k–$281k/yr14d ago74· Strong

Keep exploring

Equipment Engineer

$77k–$129k/yr · HirQ 78

Apply