Skip to content

Support Engineer

Skild AISan Mateo, CA

First seen Nov 3 · open 19 days · posted once$70k–$150k/yr

HirQ verdict

69/100 · Strong. Based on age, reposts, pay, the company's hiring and ghost signals.

Low ghost risk
True age
19 days
Reposts
Posted once

See the evidence behind this score.

Pro shows each part of the score, the reasons, the pay percentile and the listing history.

HirQ's ghost-risk estimate and company labels are automated opinions based on what we observe on employers' public job boards: how long a listing has been open, whether it was re-listed, wording in the description, and how often roles on that board close. They are not statements about an employer's intent, and a high-risk listing can still be a real opening. Figures are as of the date shown. How we measure

At a glance

Pay
$70k–$150k/yr
Level
Mid level
Team
Engineering
Work setup
On-site

Pay vs market

Employer-posted ranges for IT & Systems roles in CA in the last 12 months (384 postings).

$103k
25th pct/yr
$139k
Median/yr
$173k
75th pct/yr
$79k · 10th90th · $205k

This job: $70k–$150k/yr

Where this pay sits: ••th percentilePro

Skild AI hiring

Company page
Low follow-throughHiring50· FairAI & Machine Learning
Open roles
58
New in 30 days
10
Closed in 30 days
3
Hiring trend, 13 weeksPro
Follow-through: ••%Pro

About the role

From Skild AI's careers page, checked Nov 22

Company Overview

At Skild AI, we are building the world's first general purpose robotic intelligence that is robust and adapts to unseen scenarios without failing. We believe massive scale through data-driven machine learning is the key to unlocking these capabilities for the widespread deployment of robots within society. Our team consists of individuals with varying levels of experience and backgrounds, from new graduates to domain experts. Relevant industry experience is important, but ultimately less so than your demonstrated abilities and attitude. We are looking for passionate individuals who are eager to explore uncharted waters and contribute to our innovative projects.

Position Overview

We are looking for a Support Engineer to develop the systems and processes that ensure quality, reliability, and performance across our robotics and autonomous platforms. This role is hands-on with integrated hardware systems and entails building prototypes, designing/fabricating test setups in CAD, debugging/diagnosing electromechanical issues, and supporting manufacturing workflows.

You’ll split your time between fleet support and prototyping: triaging electromechanical failures across deployed units, running the repair and RMA workflow from intake to return to service, and taking new hardware from concept through CAD, fabrication, bring-up, and validation. You’ll track failures across the fleet, pull logs and telemetry to separate hardware faults from software faults, and turn recurring issues into clear root-cause reports that shape the next design. You’ll work directly with Electrical, Mechanical, and Firmware Engineers to accelerate iteration, raise reliability, and lay the groundwork for scalable production.

Responsibilities

  • Own fleet uptime: troubleshoot, root-cause, and repair electromechanical issues across a growing fleet with minimal supervision, and run the repair/RMA workflow from intake through return to service.
  • Track failures across the fleet, identify recurring issues, and write clear root-cause reports that drive design and process fixes.
  • Drive rapid prototypes end to end: build, test, and iterate on sub-assemblies, feasibility units, and full systems alongside other engineering teams.
  • Design in CAD and fabricate custom test fixtures, jigs, enclosures, and harnesses; produce machining-ready drawings using GD&T.
  • Read and interpret schematics, PCB layouts, and cable drawings to bring up, test, troubleshoot, and rework PCBAs and create custom harnesses.
  • Operate standard bench equipment (oscilloscopes, logic/spectrum analyzers, programmable power supplies, DMMs) and perform PCBA and cable rework to IPC standards.
  • Use the command line to flash firmware, pull and parse logs over SSH or serial console, and run diagnostic scripts during debug and bring-up.
  • Document prototyping phases, test procedures, and failure analyses clearly; manage design files and documentation under version control; source and procure components, and maintain organized BOMs for prototypes.
  • Maintain and troubleshoot lithium battery systems across the fleet: safe handling and charging, monitoring BMS behavior, and diagnosing pack and cell-level faults.
  • Work with embedded communication protocols (CAN, UART, I2C, SPI) and common robotics sensors (IMU, GPS, cameras, LiDAR).

Preferred Qualifications

  • BS or MS in Mechatronics, Electrical, or Mechanical Engineering, or a related field, with 3+ years in a prototype, development, or failure-analysis lab.
  • Experience with robotic, vehicle, or drone hardware: PCBAs, harnesses, actuators, sensors, and power systems.
  • Demonstrated ability to root-cause hardware failures methodically from first principles, communicate findings clearly, and act on them.
  • Proficiency in parametric CAD for parts, fixtures, and assemblies (Onshape preferred).
  • Solid working knowledge of circuits, power distribution, signal integrity, and common electrical components, with the ability to independently read PCBA schematics, cable drawings, and test procedures.
  • SMD soldering and rework down to 0402, including hot-air and microscope work.
  • Crimping, rework, and harness assembly to IPC-A-610 / IPC/WHMA-A-620 standards; familiarity with connector families and electrical components.
  • Strong mechanical fundamentals: tolerance and fit analysis, material selection, fastener and vibration best practices, and DFM for printed, machined, and sheet metal parts.
  • Experience with FDM/SLA 3D printing and basic machine shop skills.
  • Comfort in Linux, macOS, and Windows terminals (bash, SSH, serial tools) and basic Python or bash scripting.
  • Thrive in a fast-paced environment where priorities and hardware change quickly.

Base Salary Range

$70,000—$150,000 USD

Skills mentioned

  • CAD
  • Bash
  • Embedded Systems
  • Robotics
  • Python
  • Linux
  • Machine Learning
  • Mechanical Engineering
Apply on Skild AI's siteOpens Skild AI's own application page.

Similar jobs

Same role or field, nearby or remote, ranked by HirQ score.

Support Engineer

AnthropicSan Francisco, CA | New York City, NY | Seattle, WAHybrid

$210k–$250k/yr6mo ago61· Fair

More at Skild AI

All roles

Keep exploring

Support Engineer

$70k–$150k/yr · HirQ 69

Apply